How to Choose a Console Table: Size, Style and Storage Guide
My Console Table
A console table is one of the hardest-working pieces of furniture in a home. It catches keys and post by the front door, holds a lamp behind the sofa, or turns an empty wall into a styled corner. The right one fits the space, leaves room to walk past and gives you the storage you need. This guide walks you through the choice step by step, with real measurements in cm and inches.
1. Decide where it will go
Start with the room, because it sets almost every other choice.
- Hallway or entrance: the most common spot. Depth matters most here, because people need to walk past it every day. Browse our hallway console tables.
- Behind the sofa: a long, slim table placed against the back of a sofa that floats in the room. Height and length matter most. See our console tables for behind the sofa.
- Living room, landing or bedroom: a console can act as a slim sideboard, a dressing table or a display surface. Here style and storage usually come first.
2. Measure the space
Take three measurements before you look at any table, and write them down.
- Wall width: measure the free wall, then subtract anything in the way, such as a radiator, door frame or light switch you still need to reach.
- Available depth: measure from the wall to where people walk. In a hallway, try to keep a clear walkway of around 90 cm (36 in), and check that doors can still open fully.
- Height limit: note window sills, radiators, sockets and the height of the sofa back if the table will sit behind it.
Tip: mark the table's footprint on the floor with masking tape and live with it for a day. If you keep bumping into the tape, choose a slimmer table.
3. Get the depth right
Depth is the measurement that makes or breaks a console table, especially in a UK hallway.
- 15 to 20 cm (6 to 8 in): ultra-slim tables for very tight hallways. Enough for keys, post and a small plant.
- 20 to 25 cm (8 to 10 in): a good compromise for narrow halls and for behind most sofas.
- 25 to 35 cm (10 to 14 in): the classic console depth. Room for a lamp, a tray and baskets on a lower shelf.
- 35 cm (14 in) and over: best for wider entrances and living rooms, or when you want cupboards and deep drawers.
Our tables start at just 15 cm deep: see all our narrow console tables.
4. Choose the width
As a rule of thumb, a console table looks balanced when it takes up about two thirds to three quarters of the wall it stands against. Leave some space on each side so it does not feel squeezed.
- 60 to 90 cm (24 to 35 in): small hallways, landings and alcoves. See our small console tables.
- 90 to 120 cm (35 to 47 in): the most versatile size for hallways and living rooms.
- 140 to 180 cm (55 to 71 in): long hallway walls and large sofas. See our long console tables.
Behind a sofa, choose a table a little shorter than the sofa itself, so it does not stick out at the ends.
5. Check the height
Most console tables are between 75 and 85 cm (30 to 33.5 in) high, which is comfortable to reach while standing and sits well under a mirror or artwork.
- Behind a sofa: pick a table level with the top of the sofa back or slightly lower, so it is easy to reach from the seat and does not block the view.
- Under a window or radiator shelf: make sure the table sits below the sill.
- With a mirror above: hang the mirror so its bottom edge is roughly 15 to 25 cm (6 to 10 in) above the table top.
6. Decide how much storage you need
- Drawers hide keys, chargers, dog leads and post. Ideal by the front door. See our console tables with drawers.
- Open shelves hold baskets, shoes and books, and keep the table looking light.
- Cupboards hide bulkier clutter but need more depth.
- No storage at all gives the cleanest, most decorative look, perfect for a statement entrance.
Compare designs in our console tables with storage.
7. Pick a material you can live with
- Wood and wood effect: warm and easy to match. Solid wood can be sanded and refinished; wood-effect finishes are lighter, more affordable and wipe clean. Every listing states exactly which it is. See our wooden and oak console tables.
- Marble look and sintered stone: a luxurious finish. Sintered stone is very hard-wearing and resists heat and stains; marble-effect tops give the look for less. See our marble console tables.
- Glass: visually light, so a small hallway feels bigger. See our glass console tables.
- Mirrored: bounces light around a dark entrance and suits a glamorous interior. See our mirrored console tables.
- Metal frames: black for an industrial or modern look, gold for a touch of glamour. See our black and gold console tables.
8. Match your style
- Modern: clean lines, glass, stone and slim metal frames. Browse modern console tables.
- Industrial: rustic wood tops on black metal frames. Browse industrial console tables.
- Rustic and farmhouse: chunky shapes and warm, weathered wood. Browse rustic and farmhouse console tables.
- Half moon: a rounded front with no sharp corners, ideal where space is tight. Browse half moon console tables.
9. Think about safety
Slim and tall tables can tip if they are leaned on or climbed. If you have children or pets, fix the table to the wall with an anti-tip fixing, and keep heavy items on the lower shelf rather than the top.
Quick checklist before you buy
- Wall width measured, with radiators, doors and switches taken into account.
- Depth leaves a comfortable walkway, ideally around 90 cm (36 in).
- Height works with the sofa back, window sill or mirror.
- Storage matches what you need to hide or display.
- Material suits how much wear the table will get.
- Anti-tip fixing planned for slim or tall designs.
Most of our tables show their exact size right in the title, and every product page states the real materials, so you can check all of this before you order. Ready to choose? Browse all console tables.